Expert Answers about Palomino Puma Fifth Wheel
- Troubleshooting Installation Of A Swagman Traveler XC2 Bike Rack On A Trucks 2 Receiver
- The Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers # S64663 is designed to work with the 2" receiver on your truck as well as the included RV bumper mount receiver so you should have no problems using the threaded hitch pin on your truck's receiver. It sounds like either the threads on the hitch pin are stripped or the hitch pin hole on your truck's receiver is too far back for the shank of the bike rack. If you could provide some pictures and additional details of...
view full answer... - Recommended Suspension Enhancement For A 2019 Palomino Puma 5th Wheel To Mitigate Chucking
- Since you've already upgraded your pin box to help deal with the chucking the next step would be to upgrade the suspension on the trailer to help combat the road shock you've been experiencing. For this I recommend the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle # RM-2460.
This system has heavy-duty shocks that reduce trailer bounce, chucking, and porpoising. It's a bolt-on installation so you don't have to worry about welding on any components....
view full answer... - Correct Trailair Flex Air 5th Wheel Pin Box for a 2019 Palomino Puma 257
- The correct Trailair Flex Air 5th Wheel Pin Box for a 2019 Palomino Puma 257 is part # LC328492. This pin box will be an excellent upgrade over the original providing improvement in ride quality, increased handling, and reduced wear on both the truck and trailer.
In regards to dimensions, the pin box is designed to mirror that of the one it replaces although they are not always the exact same. That said, any difference in length would be minimal and would not cause any cab clearance...
view full answer... - Repair Kit For Lippert Landing Gear Follow Leg
- Your Palomino Puma should have Lippert landing gear, though we don't have any way of knowing specifically the brand of landing gear a trailer has for replacement parts so you'll want to verify this. By "strut" it sounds like you are referencing the follow leg drive shaft, and that is something you can get with a repair kit:
- Lippert Venture Follow Leg Repair Kit for 5th Wheel RV Landing Gear # LC146060
view full answer... - Hardware Needed With the Road Armor Equalizer Kit
- When using the Road Armor Shock Absorbing Equalizer Kit # LC696740, for bolts you want ten 9/16" suspension bolts part # ABS34FR and 8 shackle straps per axle. The kit you are talking about which is part # LC64FR has the correct parts from Lippert, but not enough of them. The correct shackle straps also depends on your trailer.
If you let me know what length your shackle strap is I can recommend those too. The most common size for the type of trailer you have is a 2-5/8 inch shackle strap...
view full answer... - Trailer Hitch That Could Fit 2018 Palomino Puma
- The best option for a hitch for the rear of your 2018 Palomino Puma is the Curt # 13703 which fits frame widths of 22 to 72 inches and all frame styles.
It's hard to say if this would interfere with your leveling jacks but I attached a picture of this installed at the rear of an RV to give you a better idea that you can compare to your setup.
view full answer...
Go To Results